HS-200E series compact single switching power supply
Features:
·AC input voltage range selected by switch
·Small volume，low weight，high efficiency
·Protections:short circuit/over load/over voltage
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Years warranty
| Model | HS-200E-5 | HS-200E-12 | HS-200E-15 | HS-200E-24 | HS-200E-27 | HS-200E-48 | |
|
output | DC voltage | 5V | 12V | 15V | 24V | 27V | 48V |
| Voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | |
| Rated current | 30A | 16.6A | 13.3A | 8.3A | 7.4A | 4.2A | |
| Current range | 0~30A | 0~16.6A | 0~13.3A | 0~8.3A | 0~7.4A | 0~4.2A | |
| Rated power | 150W | 199.2W | 199.5W | 199.2W | 199.8W | 201.6W | |
| Ripple&noise | 150mvp-p | 150mvp-p | 150mvp-p | 180mvp-p | 180mvp-p | 200mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | ±10% | |
|
input | Voltage range | 90~132VAC/180~264VAC(selected by switch)，254~373VDC | |||||
| frequency | 47~63HZ | ||||||
| AC current | 4.0A/115VAC，2.0A/230VAC | ||||||
| efficiency | 80% | 83% | 83% | 85% | 85% | 86% | |
| Inrush current | Cold start current18A/115VAC，36A/230VAC | ||||||
| Leakage current | < 2.5mA/240VAC | ||||||
|
protection | overload | Rated output power115%~150% start over load protection | |||||
| protection type:hiccup mode，auto-recovery after fault condition is removed | |||||||
| Over voltage | 6.8~8.2V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | 42.6~44.2V | 54.8~56.6V | |
| protection type:hiccup mode，auto-recovery after fault condition is removed | |||||||
| ----- | ----- | ||||||
| ----- | |||||||
| environment | Working temp,humidity | -10℃~+60℃，20%~90%RH | |||||
| Storage temp,humidity | -20℃~+85℃，10%~95%RH non-condensing | ||||||
| Withstand vibration | 10~500HZ，2G10min/1cycle，period for 60 minutes，each axes | ||||||
| safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
| Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | ||||||
| Fit standard | Safety standard | Compliance to UL1012 | |||||
| EMC standard | Compliance toEN55022，CLASSA | ||||||
| others | Dimension | 199*98*38mm(L*W*H) | |||||
| Weight/packing | 0.6kg/30pcs/19kg/0.034 m³/1.2CUFT | ||||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||||
