HS-350W series compact single switching power supply
Features:
·AC input voltage range selected by switch
·Small volume，low weight，high efficiency
·Protections:short circuit/over load/over voltage/overtemp
·Built-in cooling DC fan
·Cooling fan ON-OFF auto control
·LED indicator for power on
·100% full load burn-in test
·2 Years warranty
| Model | HS-350-5 | HS-350-12 | HS-350-15 | HS-350-24 | HS-350-27 | HS-350-48 | |
|
output | DC voltage | 5V | 12V | 15V | 24V | 27V | 48V |
| Voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | |
| Rated current | 50A | 29A | 23A | 14.6A | 13 | 7.3 | |
| Current range | 0~50A | 0~29A | 0~23A | 0~14.6A | 0~13A | 0~5.2A | |
| Rated power | 250W | 348W | 345W | 350.4W | 351W | 350.4W | |
| Ripple&noise | 150mvp-p | 150mvp-p | 150mvp-p | 180mvp-p | 180mvp-p | 200mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | ±10% | |
|
input | Voltage range | 90~132VAC/180~264VAC(selected by switch)，255~373VDC | |||||
| frequency | 47~63HZ | ||||||
| AC current | 6.5A/115VAC，4.0A/230VAC | ||||||
| efficiency | 80% | 82% | 82% | 84% | 84% | 85% | |
| Inrush current | Cold start current25A/115VAC，50A/230VAC | ||||||
| Leakage current | < 3.5mA/240VAC | ||||||
|
protection | overload | Rated output power110%~135% start over load protection | |||||
| protection type:hiccup mode，auto-recovery after fault condition is removed | |||||||
| Over voltage | 6.8~8.2V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | 33.2~35.6V | 54.8~56.6V | |
| Protection type:hiccup mode，auto-recovery after fault condition is removed | |||||||
| Over temperature | TSW1detect on heatsink of power transistor≥85℃±5℃, start over temperature protection | ||||||
| protection type:hiccup mode，auto-recovery after temperature become normal | |||||||
| environment | Working temp,humidity | -10℃~+60℃，20%~90%RH | |||||
| Storage temp,humidity | -20℃~+85℃，10%~95%RH non-condensing | ||||||
| Withstand vibration | 10~500HZ，2G10min/1cycle，period for 60 minutes，each axes | ||||||
| safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
| Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | ||||||
| Fit standard | Safety standard | Compliance to UL1012 | |||||
| EMC standard | Compliance to EN55022，CLASSA | ||||||
| others | Dimension | 199*99*48mm(L*W*H) | |||||
| Weight/packing | 0.8kg/24pcs/20kg/0.034 m³/1.2CUFT | ||||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||||
