NES-150W series Efficient single switching power supply
Features:
·AC input voltage range selected by switch
·Small volume，low weight，high efficiency
·Protections:short circuit/over load/over voltage
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Years warranty
| Model | NES-150-5 | NES-150-12 | NES-150-15 | NES-150-24 | NES-150-48 | |
|
output | DC voltage | 5V | 12V | 15V | 24V | 48V |
| Voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | |
| Rated current | 30A | 12.5A | 10A | 6.5A | 3.2A | |
| Current range | 0~30A | 0~12.5A | 0~10A | 0~6.5A | 0~3.2A | |
| Rated power | 150W | 150W | 150W | 156W | 153.6W | |
| Ripple&noise | 80mvp-p | 120mvp-p | 120mvp-p | 120mvp-p | 200mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | |
|
input | Voltage range | 90~132VAC/180~264VAC(selected by switch)，255~373VDC | ||||
| frequency | 47~63HZ | |||||
| AC current | 3A/115VAC，2A/230VAC | |||||
| efficiency | 80% | 83% | 83% | 84% | 86% | |
| Inrush current | Cold start current30A/115VAC，45A/230VAC | |||||
| Leakage current | < 2mA/240VAC | |||||
|
protection | overload | Rated output power110%~150% start over load protection | ||||
| protection type:hiccup mode，auto-recovery after fault condition is removed | ||||||
| Over voltage | 6.8~8.2V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | 54.8~56.6V | |
| protection type:hiccup mode，auto-recovery after fault condition is removed | ||||||
| ----- | ----- | |||||
| ----- | ||||||
| environment | Working temp,humidity | -20℃~+60℃，20%~90%RH | ||||
| Storagetemp,humidity | -40℃~+85℃，10%~95%RH non-condensing | |||||
| Withstand vibration | 10~500HZ，2G10min/1cycle，period for 60 minutes，each axes | |||||
| safety | Withstand voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | |||||
| Fitstandard | Safety standard | Compliance toUL1012 | ||||
| EMC standard | Compliance toEN55022，CLASSA | |||||
| others | Dimension | 199*98*38mm(L*W*H) | ||||
| Weight/packing | 0.6kg/30pcs/19kg/0.034 m³/1.2CUFT | |||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||||
